ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
ESP
AÑOL
PORTUGUÊS
EN-3
...
DIP switch 3: OFF (N.C.)
...
DIP switch 3: ON (N.O.)
Connectors to be used
Connector for POWER and ALARM
Connector for TROUBLE
How to position a battery
N.C.
N.O.
35 (1.38)
130 (5.12)
30 (1.18)
Unit: mm (inch)
The transmitter used should have the internal dimensions of H 130 × W 30 × D 35 mm.
(H 5.12 × W 1.18 × D 1.38 inches)
Red
Black
External input is N.C.
External input is N.O.
- When monitoring ALARM and TROUBLE using the transmitter with 1 external input
3
Bracket
Main unit
2.
1.
1
Open the main unit cover.
2
Remove the fixture.
Fixture
4
Open the separate box.
Hold the top of the bracket and remove the main unit.
5
Select the mounting method.
Stacking method (2-4)
Side-by-side method (2-5)
Top-to-bottom method (2-5)
Note>>
• Be sure to keep connectors
installed through the bottom part of
bracket after main unit is removed.
Note>>
• Do not remove the
separate box tamper.
Note>>
• Be sure to mount the
main unit on the top.
- To monitor only the ALARM using a transmitter
with 1 external input
- To monitor the ALARM and TROUBLE using
a transmitter with 2 external inputs
Connector for
POWER and
ALARM
Connector for
TROUBLE
Connector for
POWER and
ALARM
3
3
2-2
TRANSMITTER PREPARATION
2-3
BEFORE WALL MOUNTING
