Optelec
ALVA 640 Comfort
Page 30
English
Safety Logo:
This device complies with the
93/42/EEC, EN60601-1,EN60601-2
of related European standards.
Disposing of your old product:
-If you see this symbol-
Information on Disposal for other Countries outside the
European Union.
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your
local authorities or dealer and ask for the correct
method of disposal.
Classification:
•
No protection against the ingress of water: IPX0
•
Mode of operation: Continuous Operation
•
The equipment not suitable for use in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide: Not AP or APG Category:
Environmental conditions
Environment
Operating Temperature: +0
℃ ~ +40℃
Conditions
Storage/Transportation
Temperature: -20
℃ ~ +60℃
Operation Relative Humidity: 20% ~80% Non-Condensing
Storage/Transportation
Relative Humidity: 10% ~95% Non-Condensing
Atmospheric pressure: 500~1060 hPa
Warranty conditions
Optelec warrants the ALVA 640 Comfort, effective from the date of delivery, to be
free of any defects in material and workmanship.
Warranty is not transferable. The ALVA 640 Comfort and BC680 has been designed
for the individual purchaser to be used in home and office environments. Optelec
reserves the right to repair or replace any purchased ALVA 640 Comfort and BC680
with a similar or better product.
In no event shall Optelec or its distributors be liable for indirect or consequential
damages. The original user’s remedies are limited to replacement of ALVA 640
Comfort modules. This warranty is valid only when serviced in the country of original
purchase and with intact seals. For additional warranty claims or service during or
after warranty period, please refer to your distributor.
Optelec takes no responsibility for use of this device other than described in this
manual.
