S E T U P M E N U O P T I O N S
34
6. HDMI 2 Setup:
Configure HDMI 2 options. The available options are the same as those for
HDMI 1 Setup
.
NOTE
HDMI 2 Setup
option is not available if the player is equipped with only one HDMI output
port. It becomes available when a module with an “HDMI 2” port is installed.
7. TV Aspect Ratio
: Sets the aspect ratio of the player’s output image.
16:9 Wide
–16:9 contents will be displayed in its native aspect ratio, and 4:3 contents will
be stretched horizontally.
16:9 Wide/Auto
(default)–16:9 contents will be displayed in its native aspect ratio, and 4:3
contents will be displayed with black borders on both sides in order to maintain the original
4:3 aspect ratio.
For a detailed description on how to choose a proper TV Aspect Ratio, please refer to the
Determine the Display Aspect Ratio
section on page 39
of this manual.
8. 3D
Setting
: Adjusts the playback settings for better 3D visual quality.
3D Output
–Allows you to choose the video output mode for 3D content.
Auto
(default)–Outputs 3D if supported both by both the disc content and the display.
The player automatically checks for the existence of 3D content on the disc and the 3D
compatibility of the TV or projector. If both criteria are met, the player sends 3D video
from its HDMI output terminals; otherwise, only 2D video is sent out. You may need to
wear 3D glasses that come with your TV in order to view 3D movies.
Off
– Always output 2D video format, even when 3D video exists on the disc. This
guarantees the video quality if your TV is not 3D compatible, or if some necessary
components (such as the 3D glasses) are missing.
Forced
–Always output 3D video format for 3D Blu-ray Discs. You may experience a
black screen (no video output) if your TV is not 3D compatible.
3D TV Size
– Allows you to enter the diagonal screen size of the 3D HDTV. Use the
number buttons on the remote to enter the actual diagonal size of the TV screen, and then
press the
ENTER
button to confirm. The default value is 46 inches. This value does not
directly affect video quality, but some 3D movies may use this value to decide how to place
certain graphics.
9. DVD
24p
Conversion
: Allows you to enable 24Hz frame rate conversion for DVD. Many DVDs
that originate from theatrical movies are encoded with a technique called “3:2 telecine” in order
to convert the 24 frames per second film to 60Hz video signal. The player can convert the 60Hz
video signal back to 24 frames per second film and output as 1080P/24Hz. Smoother motion
may be achieved by enabling this option, if both the TV and the DVD disc meet the conversion
conditions. The available options are:
On
– Converts DVD to 24Hz frame rate when possible. Remember that motion errors may
be observed if the DVD is not suitable for such conversion.
Off
(default) – Does not convert DVD to 24Hz frame rate.
10.
De-interlacing Mode
– Allows you to select the appropriate algorithm that the player should
