O P T I O N A L M O D U L E I N S T A L L A T I O N
14
Step 5
: Place the HDBaseT output back plate (T06) to the opening on the back panel, and secure
with 2 screws (T04).
Step 6
: Place the HDBaseT output board (T07) into position. Align the screw mounting holes
properly.
Step 7:
Install the 2 screws with washer (T05) to secure the HDBaseT output board to the bottom
plate.
Step 8
: Install 1 screw (T04) to fasten the HDBaseT output board (T07) to the back plate.
Step 9
: Plug the remaining end of the cable bundle (T01) into the socket on the HDBaseT output
board. Pay attention to identify the correct direction, align the plug properly and firmly plug it in.
