1
Optional Module Installation
The BDT-101CI features a modular design, and can be customized to fit the specific requirement of each
installation. When you order the BDT-101CI you can specify to have the optional modules pre-installed. You
can also order the optional modules and perform the installation yourself. The following sections describe the
installation procedures for some common module types.
Cautions shall be taken in order to avoid injury to yourself and damage to the products.
Note
To avoid the possibility of electric shock, disconnect the power and other equipment before
installation.
Wear protective gloves during installation to avoid possible cuts from sharp metal edges.
Circuit Boards are subject to electrostatic damage. Wear an ESD wrist strap that grounds you
during work.
Tools required:
No.2 Phillips screwdriver
Hex socket screwdriver
Anti-static
protective
glove
ESD wrist strap
Removing the Top Cover
In order to perform a module installation, the top cover of the player must be removed first. The following steps
illustrate how to remove the top cover.
Step 1
: Remove the 6 screws that secure the top cover to the back panel of the player. Save the
screws for installing the top cover later.
Step 2
: Remove the 4 screws on the sides of the player, 2 on each side. Save the screws for
installing the top cover later.
Step 3
: Lift the top cover from the back. Tilt it upwards and then slide it towards the back in order to
release it from the front panel. Remove the top cover.
