S E T U P M E N U O P T I O N S
56
Storage Device
– Allows you to select which storage device should be used as the persistent
storage. There are also three USB ports on the player that can accept a USB drive to be used
as the persistent storage. You may choose from the following:
Internal Flash
– Uses the internal flash memory for persistent storage.
USB Drive
– Uses a USB drive for persistent storage. To meet the specification for BD-Live,
a USB flash drive of 1GB or larger is required. A USB hard drive is not recommended.
NOTE
The new storage device choice becomes effective only after the player is restarted. Please
make sure that you turn off the player and then turn it back on after changing the
Storage
Device
option.
Space Used
– Displays the used space of the persistent storage. If too much space is used and
the available space becomes too low, some Blu-ray Discs may not play properly.
Erase Persistent Storage
– Erases the BD-Video data from the persistent storage or initializes
a USB drive so it can be used for persistent storage.
13.
Settings Management
: Allows you to backup or restore the player settings, and lock the settings
from being accidentally changed.
Backup Settings –
Backup the player settings to the first detected USB storage device. The
player will create a new configuration file named “[player model].cfg”, such as
“BDT101CI.cfg”,and the settings will be stored in binary format which can only be accessed by
OPPO technical support.
Restore Settings
– Restore the player’s settings from external USB storage. The player will
access the first detected USB storage device for the configuration file. To avoid any confusion,
we recommend only connect one USB storage device to the player at this time.
Lock Settings
– Lock important settings to prevent inadvertent changes. You will specify a
password for unlocking the settings later.
Unlock Settings –
Unlock all settings. You will need to enter the correct password specified
when the settings are locked.
14.
Reset Factory Defaults
: To reset all settings to the factory default value. This operation also set
BD-Live Network Access
to be
Off
(details on page 60) and performs
Erase Persistent
Storage
(details on page 56). However, the remote control code, parental control password and
ratings will not be reset. This operation is only available when the playback is completely stopped or
when there is no disc loaded.
Erase Accounts and Settings
– Resets all settings to the factory default value and remove all
account information.
Erase Settings
– Resets all settings to the factory default value, but keeps account information.
