S E T U P M E N U O P T I O N S
60
•
30 Bits
– Use the 30-bit per pixel Deep Colour mode.
•
Off (Dithered)
–Do not use Deep Colour, but apply the dithering technique.
•
Off
(default) – Do not use Deep Colour.
4.
Deep Colour (HDMI 2)
– To select the Deep Colour mode for the HDMI 2 output. The available options
are the same as those for
HDMI Deep Colour
(HDMI 1).
5.
Demo Mode
– To enable a special split-screen demonstration mode. This is designed for the
demonstration of the Qdeo video processing technology. It can also be used as an aid for setting
picture control adjustments for Noise Reduction, Colour Enhancement and Contrast Enhancement. It
should NOT be used for normal movie watching. The available options are:
•
On
– The video screen will be split in half. The left side shows video without the help of Qdeo
video processing, and the right side demonstrates the result of Qdeo video processing.
•
Off
(default) – Normal viewing mode.
6.
Video Only (HDMI 1)
– To choose whether only send video signal (no audio signal) to HDMI 1 terminal
or not. The available options are:
•
No
(default) – Both video and audio signals are sent to HDMI 1 terminal.
•
Yes
– Only video signal is sent to HDMI 1 terminal. This can be useful if you use HDMI 1 only
for video display, no need to lower the volume or mute the HDTV connecting to it.
NOTE
Since the Deep Colour feature is OPTIONAL and may not be supported by all TVs, enabling Deep Colour
while connected to a TV without this feature may result in no effect or no video.
At this time, no disc is encoded with Deep Colour. Enabling Deep Colour will not magically make Colours
richer, but will help preserve the maximum precision as a result of video processing and picture control
adjustment.
Dithering
is a technique to improve the image Colour depth with limited Colour quantization.
NOTE
The demo mode is canceled automatically after the player is turned off.
