A D V A N C E D O P E R A T I O N S
34
ADVANCED OPERATIONS
TV System Selection
While you may want to set the video output system (PAL/NTSC) to the same as
that supported by your TV, realize that the OPPO Blu-ray Disc Player will convert
any content that is not in the correct format your TV understands. The default
output is PAL for Europe.
Press and hold the
P/N
button for 5 seconds on the remote control to cycle the
video output to PAL, NTSC or “Multi” system. The TV screen displays the selected
system name.
Some points to keep in mind:
When the video output is set to PAL or NTSC system, the player will convert the disc content to the
selected system.
When the video output is set to “Multi”, the player will
not
perform system conversion. The “Multi” mode is
only to be used if your TV supports
both
PAL and NTSC systems.
Most TV sets only support one of the PAL or NTSC systems. If the wrong output is selected, the TV may
not display a picture. In this case repeat pressing the
P/N
button until a supported system is selected.
The output system selected with the
P/N
button will be remembered when the player is turned off. The
output system selection can also be done by setting the “
TV System
” item in the “
Video Setup
” section of
the player’s Setup Menu. (Refer to page 54 for details.)
Output Resolution
The OPPO BDP-95EU Blu-ray Disc Player supports multiple output
resolutions. For detailed discussion on how to choose the best output
resolution, please refer to the
Select the Best Output Resolution
section on
page 24 of this manual.
If you would like to change the output resolution, you may do so by pressing
the
RESOLUTION
button on the remote control:
1. Make sure the video cable is properly connected.
2. Turn on the TV. Adjust the TV to use the proper input (HDMI, DVI or Component).
3. Make sure that the player is turned on. Although the output resolution can be changed “on the fly”, it is
recommended that you stop playback and take out the disc before changing the output resolution.
Press the
RESOLUTION
button. A “Resolution Setting” menu appears on the TV screen. In case the
TV does not support the current resolution and you cannot see the “Resolution Setting” menu, the
current resolution is also displayed on the front panel.
4. Use the
UP/DOWN ARROW
buttons to select the new output resolution. You may also press the
RESOLUTION
button multiple times to cycle through the available output resolutions. The new
resolution is also displayed on the front panel if you cannot see the “Resolution Setting” menu on the
TV screen.
5. Press the
ENTER
button to apply the selected output resolution. Or, if you do not want to change the
output resolution, press the
RETURN
button to exit.
