I N S T A L L A T I O N
9
Changing the Remote Code
The remote control supports one of three remote codes. The default is “Code 1”. If you have other OPPO products
placed close to the BDP-95EU, they may inadvertently respond to the BDP-95EU remote control. In this case you
can select a different remote code to avoid conflicts.
To select a new remote code, open the battery compartment cover of the remote control, and then use a ball point
pen to flip the switch to one of the positions marked as “1”, “2”, or “3”. Close the battery compartment cover. Make
sure that the BDP-95EU player is turned on and
the disc tray is ejected
. Aim the remote control at the player.
Press and hold the ENTER button for 5 seconds. The player will start using the new remote code.
CAUTIONS
•
Never drop the remote control or expose it to moisture.
•
Never expose the infrared remote sensor on the front panel to direct sunlight or other strong light sources.
•
Remote may not operate consistently when batteries become low. Replace them if operation deteriorates.
•
If the remote control will not be used for a long time, please remove the batteries.
•
Use the batteries correctly to avoid possible leakage and corrosion. Do not leave the batteries exposed to
direct sunlight or high temperature environment for a long period of time. Do not heat or expose to flame.
Do not mix old and new batteries. Do not use batteries of different types at the same time. Do not attempt
to recharge the batteries.
•
In case battery leakage occurs, do not touch the liquid with bare hands. Wipe out any liquid inside the
battery compartment and insert new batteries.
