S E T U P M E N U O P T I O N S
49
The preceding diagram should give a good description of the various elements and their context. In this
screen we could, for example, instruct you to set the
Auto Play Mode
parameter to
Off
in the
Playback
Setup
section. To indicate where we were, you would see the following:
Playback Setup > Auto Play
Mode > Off
.
To access the player’s Setup Menu simply press the
SETUP
button on the remote control. Since some
Setup Menu options can become inaccessible when the player is playing a disc, it is recommended that you
operate the Setup Menu when playback is fully stopped or when there is no disc in the player.
1. Press the
SETUP
button on the remote control, and the TV screen displays the following:
2. Press the
UP/DOWN ARROW
buttons to select the
section. There are 6 sections:
Playback Setup,
Video Setup, Audio Format Setup, Audio
Processing, Device Setup,
and
Network Setup.
Press the
ENTER
button or the
RIGHT ARROW
button to enter the selected section.
3. Press the
UP/DOWN ARROW
buttons to select the
setup item to be changed, and press the
ENTER
or
RIGHT ARROW
button to change the setting.
When the scroll icon is shown at the top or bottom
of the Setup Menu, it indicates that there are more
menu items that can be accessed by scrolling with
the
UP/DOWN ARROW
buttons.
For example, in the
Playback Setup
section, you may use
the
UP/DOWN ARROW
buttons to select the “
Auto Play
Mode
” setup item, and press the
ENTER
button to change
the “
Auto Play Mode
” setting.
NOTE
It is possible that some setup items are grayed-out and inaccessible. This can be caused by the disc still
being played back or interlocking with mutually exclusive setup items. Please stop playback or eject the
disc before trying to change these setup items. If you still cannot access the setup item, please check for
configuration conflicts and consistency. For example, if “
Video Setup > Primary Output
” is set to
“
Analog
”, the “
Output Resolution > Auto (or Source Direct)
” menu item will be grayed-out. Setting
“
Primary Output
” to “
HDMI
1 (or HDMI 2)
” will enable the “
Auto (or Source Direct)
” resolution.
