OpenScape CP200 Page 3 User Manual Download | Manualshive

Page: 3 / 155

background image

Important information

3

Important information

Trademarks

Care and cleaning instructions

• Never spray the phone with liquids as the penetrating fluids can lead to malfunctions or may

damage the device.

• Do not use substances such as alcohol, chemicals, solvents or scouring agents, as these sub-

stances can lead to surface damage.

• Clean the phone with a soft and slightly damp cloth.

Online documentation

This document along with additional information is available online at:

http://www.unify.com/



Support.

Technical notes, current information about firmware updates, frequently asked questions and lots
more can be found on the Internet at:

http://wiki.unify.com/

Software update

During a software update, the phone must not be disconnected from the power supply unit and/or
the LAN. An update action is indicated by messages on the display and/or by flashing LEDs.

For safety reasons, the telephone should only be supplied with power:
• using the original power supply unit.
• over a LAN with PoE (Power over Ethernet), which complies with the IEEE

802.3af standard.

Never open the telephone. Should you encounter any problems, consult your ad-
ministrator.

Use only original accessories.
The use of other accessories is hazardous and will render the warranty, extended
manufacturer's liability and the CE and other markings invalid.

The device conforms to the EU Directive as attested by the CE marking. The CE Dec-

laration of Conformity and, where applicable, other existing declarations of conformi-

ty as well as further information on regulations that restrict the usage of substances

in products or affect the declaration of substances used in products can be found in

the Unify Expert WIKI at

http://wiki.unify.com/

http://wiki.unify.com in the section "Declarations of Conformity".

The adjacent symbol indicates that any electrical and electronic products installed

and sold in countries of the European Union to which the WEEE2 Directive 2012/19/

EU applies should be disposed of separately from the municipal waste stream in ap-

propriate collection systems.
Information concerning the proper disposal of your Unify product in the business-to-

business market segment is available from your local sales representative in Unify or

partner sales.

7

7

7

«
1
2
3
4
5
...
»

Summary of Contents for CP200




























































































































































Reviews:

No comments

Related manuals for CP200

Brand: Panasonic Pages: 66

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 224

Brand: Panasonic Pages: 58

Brand: Panasonic Pages: 7

Brand: Panasonic Pages: 40

Brand: Aastra Pages: 2

Brand: Aastra Pages: 49

Brand: Aastra Pages: 2

Brand: Aastra Pages: 4

Brand: Aastra Pages: 7

Brand: Aastra Pages: 30

Clearspan 6757i

Brand: Aastra Pages: 2

Brand: Aastra Pages: 5

Brand: Aastra Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands