OpenScape CP200 User Manual Download Page 33

Page: 33 / 155

Answering a call via the headset

The phone rings. The caller is displayed.

The

and

flash green.

Confirm the option shown.

Press the key shown. The key lights up. The headset is activated.

if nec.

Adjust the call volume.

Answering calls automatically via the headset

Press the "Auto-Headset" function key to activate automatic call answering.

The

and

light up green.

A short acoustic signal is heard on the headset for a call and the connection is
established.

If you want to manually answer calls again, deactivate the automatic answering
function using the "Auto-Headset" key. Both keys are off.

Rejecting a call

You can reject an incoming call.

An incoming call is displayed or signaled.

Select and confirm the option shown.
The caller hears a busy signal.

Deflecting a call

Prerequisite:

An incoming call is displayed or signaled. "Deflect" must be al-

lowed.
Select and confirm the option shown.

If a destination phone number is stored (



page 111), you can select and con-

firm it. The call is deflected.

Accept?

The administrator has additionally configured a key with the "Auto-Head-
set" function (AICS Zip tone).

"Reject" must be authorized by the administrator.

Reject?

If the rejected caller's phone number is transmitted, it is saved in the call
list. You can then call this party back at a later time.

Deflect



089008844

Summary of Contents for CP200




























































































































































Search results

Summary of Contents for CP200

Reviews:

Brands by name

Popular brands

OpenScape CP200, User Manual

Search results

Summary of Contents for CP200

Reviews:

Brands by name

Popular brands