manualshive.com logo in svg

OpenScape CP200, User Manual

Share
Download
OpenScape CP200 User Manual Download Page 96

96

Network information

This overview in the user area of the Program/Service menu provides you with 
information about the IP address of the phone and the HTML address of the 
WEB-Oberfläche. It also provides real-time data about the network activity of the 
phone.

@

Press the key shown.

Select and confirm the option shown.

if nec. 

j

Enter and confirm the user password.

Select and confirm the option shown. You can browse the following overview:

Phone address: 

Name or number of telephone.

Web address

: HTTP address of WEB-Oberfläche. This address is specified in 

the address line of the Internet browser and is used to call the WEB-Oberfläche 
of the phone in the browser.

IPv4 address

: Displays the IP address or name that was assigned to the phone 

in the network.

IPv6 Global Address:

 Displays the global IPv6 address

LAN/PC-RX

: The network or PC interface data packets received are illustrated 

dynamically as columns.

LAN/PC-TX

: The network or PC interface data packets sent are illustrated dy-

namically as columns.

LAN/PC autonegotiated: [Yes|No]

: Displays whether the network or PC inter-

face data transfer rate is set to automatic (

Yes

) or manual (

No

).

LAN/PC information: [10|100|1000] Mbit/s

: Data transfer rate of the network 

or PC interface. If an interface is not in use, 

Link down

 is displayed.

User

Network information

Summary of Contents for CP200




























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands