iConnect625W ADSL/ADSL2+ Router User Guide
56
The following table lists the
Bridge Connection Setup
screen and their definitions:
Field Description
Each of the fields for
Bridge Settings
is described as follows.
LLC and
VC
are two different methods of
encapsulating multiple sessions. The default is set to
LLC
.
LLC
With
LLC
encapsulation, a link control
header is added to the Ethernet packet that
identifies the protocol type (Ethernet). This
allows multiple protocols to be transmitted
over the ATM Virtual Circuit (VC).
Encapsulation
VC
With
VC m
ultiplexing, .no link control header
is needed as the ATM VC is assumed to be
carrying a single protocol.
Bridge
Settings
Select LAN
Select the LAN Group (as defined in the
LAN
Configuration
screen) for the bridged connection. The
options are:
•
LAN Group 1
•
LAN Group 2
•
LAN Group 3
•
LAN Group 4
•
LAN Group 5
•
None
The
Bridge
connection is added to the LAN Group
configuration, unless you have selected the option:
None.
In this case, the connection will be added to
the
Interfaces
box instead.
Apply
Applies the changes made to the connection.
Delete
Deletes the connection.
Cancel
Cancels the changes made to the connection.
For VLAN and PVC field descriptions, please refer to the table under PPPoE section.
