iConnect 625W ADSL Router User Guide
7
2. iConnect625W
Overview
2.1 Important
Safety
Instructions
WARNING!
BEFORE USING YOUR DEVICE, BASIC SAFETY INSTRUCTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSON, INCLUDING THE
FOLLOWING:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. When cleaning this product, do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
4. Do not use this router in high humidity or high temperatures.
5. Do not open or repair the device yourself. If this router is too hot, turn off the power
immediately and have it repaired at a qualified service centre.
6. Avoid using this product and all accessories outdoors.
7. Place this router on a stable surface.
8. Only use the power adaptor that comes with the package. Using a different voltage-rating
adaptor may damage this router.
9. Slots and openings on the sides and top of the device are provided for ventilation. To protect it
from overheating, these openings must not be blocked or covered. The opening should never
be blocked by placing the product on the bed, sofa, rug or other similar surface. This product
should never be placed near or over a radiator or heat register. This product should not be
placed in a built-in installation unless proper ventilation is provided.
10. Do not allow anything sharp to rest on the cables. Do not locate this product where the cord
could be damaged by persons walking on it.
11. Do not overload wall outlet extension cords, as this can result in the risk of fire or electric
shock.
12. To reduce the risk of electric shock, do not disassemble this product. Instead, when some
repair work is required, take the unit to the place of purchase. Opening or removing covers on
the router will void the warranty that comes with the product.
13. Unplug this product from the wall outlet and refer servicing to the place of purchase under the
following conditions:
a. When the power supply cord or plug is damaged or frayed;
b. If liquid has been spilled onto the product;
c. If the product has been exposed to rain or water;
d. If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions because improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation;
e. If the product has been dropped or damaged;
f. If the product exhibits a distinct change in performance.
SAVE THESE INSTRUCTIONS
