iConnect625W ADSL/ADSL2+ Router User Guide
108
The following table lists the
Dynamic Routing
screen fields and their definitions:
Field Description
Enable RIP
This enables RIP routing on the iConnect625W router.
Protocol
There are three versions of RIP:
1. RIP v1 (UDP Protocol)
2. RIP v2 (multicast protocol)
3. RIP v1-Compatible (UDP Protocol with multicast format)
Routers using RIP v1 or RIP v1-Compatible protocol can talk
to each other, but not to routers using RIP v2 protocol.
Direction determines the means through which RIP routers will
be updated. Select one of the options below.
In
Selecting
In
means that the iConnect625W router will
only incorporate received RIP information.
Out
Selecting
Out
means that the iConnect625W router
will only send out RIP information.
Both
Selecting
Both
means that the iConnect625W router
will incorporate received RIP information and send
out updated RIP information.
Direction
None
Select this option if the function is not required.
Enable Password
Simple password authentication for RIP v2 was defined in RFC
1723. If you intend to use password authentication, you must
enable your password here.
Password
Type the RIPv2 authentication password here. Ensure that all
routers are configured with this password for RIPv2 to work.
