iConnect625W ADSL/ADSL2+ Router User Guide
47
Field Description
Debug
Check this checkbox to enable PPP connection
debugging facilities.
PPP
Unnumbered
PPP Unnumbered
is a special feature. It enables
the ISP to designate a block of public IP addresses
to the customer where it is statically assigned on
the LAN side. PPP Unnumbered is essentially like a
bridged connection.
LAN
The
LAN
field is associated with the
PPP
Unnumbered
field. The packets need to go through
a specific LAN group when the
PPP Unnumbered
feature is activated.
The
PVC Settings
are not mandatory except for the
VPI
and
VCI
fields.
VPI
The VPI defines the virtual path settings for the
ADSL connection between you and your ISP. The
VPI value entered here must be based on the
information provided by your ISP.
VCI
The VCI (Virtual Channel Identifier) defines the
virtual channel settings for the ADSL connection
between you and your ISP. The VCI value entered
here must be based on the information provided by
your ISP.
PVC Settings
QoS
This field defines QoS at the ATM layer. Three
different Quality Of Service options are available in
the iConnect625W:
UBR, CBR and VBR
(refer to
the previous section under the PPPoE table for the
definitions). The QoS selected here must be based
on the information provided by your ISP. This is set
to
UBR
by default.
Connect
Click
Connect
to authenticate to your ISP via PPPoA and connect to
the Internet.
Disconnect
Click
Disconnect
to break your Internet connection.
Apply
Applies the changes made to the connection.
Delete
Deletes the connection.
Cancel
Cancels the changes made to the connection.
For VLAN and PVC field descriptions, please refer to the table under PPPoE section.
