iConnect625W ADSL/ADSL2+ Router User Guide
151
10.1 System
Commands
Systems Commands allows you to save all your new settings, restart the iConnect625W
router, restart the Wireless Access Point and to restore default configurations.
To access
System Commands
, follow the steps below.
Step 1
: From
the
Tools
tab, click the
System Commands
link provided. The following
page appears:
Step 2:
Read the definitions in the table below for the purpose of each of the System
Commands buttons:
Save All, Restart, Restart Access Point
and
Restore
Defaults
.
The following table describes the
Systems Commands
screen fields and their definitions:
Field Description
Save All
This command allows you to permanently save the current
configuration of your iConnect625W router. If you restart the
system without saving your configuration, the iConnect625W
reverts to the previously saved configuration.
Restart
This command allows you to restart the system.
Restart Access
Point
This command allows you to restart the wireless AP. It is
important to restart the AP anytime you change your wireless
settings.
Restore Defaults
Use this command to restore factory default configuration.
Connectivity to the unit will be lost. You can
reconnect after the unit reboots.
