Using Oscillators with Knobs/Sliders
Knobs and sliders can have an oscillator added to them.
First off, setup a knob in your Live Controls. For this tutorial, I am going to use the same Live
Controls made in the last tutorial with Mr. Ray.
Click on the knob, then select the "Oscillator Type". Pick the type of osciallater type you would like
to use. Once you do this the oscillator will take control over the knob.
•
You can sync the oscillater to the BPM of the current song by clicking on the [Use BPM] button.
Also, you can sync to the sequencer host by using the [Use Seq] button.
•
You can latch the oscillators to start with the play button of the host and any other sequencer
that has been synced to the host. When you hit play the oscillators start oscillating along with a
sequencer (if you have put it to sync with the host).
This only applies to the selected live
control.
Open Labs MiKo LXD Production Station Manual
84
