ONOSOKKI TS-3200A, Instruction Manual

Page: 23 / 171

2-3
2. Before Use
6
MENU key
Selects the parameter setting screen.
7
OPTION key
Displays mounted options collectively.
8
CAL key
Selects the calibration screen of the analog output.
9
Cursor key
key, key
Move the cursor to a target item within the setting display.
key, key
Increments/decrements numeric values when entering condition settings.
0
TRIG key
External trigger key.
This key is effective when the MODE of the measured data display, comparator function,
and peak hold function is set to EXT.
Q
LOCK key
Locks the TRQ ZERO key and CW/CCW key.
W
TRQ ZERO key
Selects the torque zero compensation value screen in the no-load condition.
E
CW/CCW key
Since the torque zero point compensation value differs according to the rotational direc-
tion (CW/CCW), change the rotational direction with this switch. To change the direction,
press and hold this key for 2 seconds.
R
ESC/LOCAL Key
ESC: Returns to the previous screen. The last screen of ESC is the measurement screen.
LOCAL: This key is used as the local key when option GP-IB is installed.
T
ENTER key
Press this key to change the menu item or establish the setting.