ONOSOKKI TS-3200A, Instruction Manual

Page: 156 / 171

8-2
8.1 Torque Signal Measurement Unit
Input Section
Amplifier Isolated unbalanced DC amplification
Input signal Phase difference conversion type detector output signal
Input impedance About 2k
Ω
(with an input signal amplitude of 2Vpp or less)
Input frequency range 200Hz to 50kHz
Input signal amplitude range 0.2Vpp to 15Vpp
Connector TRC116-23A10-7F (Tajimi Electronics)
Setup Section
Capacity
±
1-9999
Factor 1 to 65535
Unit mNm, Nm, kNm
Number of teeth of detector P/R 1 to 9999
Torque zero compensation value CW/CCW Memorized in memory for each direction.
Response Time constant setting
16ms/31ms/63ms/125ms/250ms/500ms/1s/2s/4s/8s/16s/32s/64s
OFF is added only when the TS-0321 option is mounted.
Number of display digits (Po 4 digits (default)) / (Po 5 digits) selectable
Measurement Section
Measurement clock 4.195MHz
Sampling clock Sampling time for one data 1/256Hz (about 4ms)
Display Section
Number of display digits (Po 4 digits) / (Po 5 digits) selectable
Unit mNm/Nm/kNm
Display gate time setting 1s to 10s (shared with the rotating section) or external gate
Accuracy When combined with the detector (with 1s gate time)
N-0 compensation used:
±
0.2% / full-scale
±
1 count
(4-digits)
N-0 compensation not used:
±
0.5% / full-scale
±
1 count
(4-digits)