ONOSOKKI TS-3200A, Instruction Manual

Page: 102 / 171

5-6
5.2.1 Description of Functions
• CH1/CH2/CH3/CH4
The comparator function can be performed for 4 channels.
• ITEM
Select a comparison item.
0: TORQUE Torque
1: REVO R p m
2: POWER Output
• SET1, SET2
Enter a comparison setting.
• MODE
Select the comparison mode.
0: AVE Compares the sectional average value for each AVE TIME (average time)
setting with the setting.
1: PEAK Performs peak hold based on the sectional average value for each AVE TIME
(average time) setting and, using it as measured value, then compares it with
the setting.
2: EXT Compares the sectional average value from the external trigger signal (referred
to as TRIG IN hereafter) to next TRIG IN with the setting.
TRIG IN is generated by short-circuiting the TRIG IN pin of the TRIG switch
on the front panel or the REMOTE function (or by setting the logic to L).