ONOSOKKI TS-3200A, Instruction Manual

Page: 163 / 171

8-9
Analog Output
Channel 2 channels
Items Two items out of torque, rpm, and POWER (output) can be selected.
For details, refer to the following:
8.1 Torque Signal Measurement Unit: Output Section
8.2 Rotational Signal Measurement Unit: Output Section
8.3 POWER (Output) Measurement Unit: Output Section
Connector C02 (BNC)
BCD Output (Option)
Channel 2 channels
Items Selected from torque, rpm, and output.
Output update At intervals of gate setup time (0.1 to 10s external) or sampling time
Output format Positive logic open-collector output
Withstand voltage 24VDC
Sink current 32mA or less
Residual voltage 0.6V or less
Connector 57-40500 Amphenol full pitch, 50 pins
Comparator Output (Option)
Items Upper or lower limit setting is possible for torque, rpm, and POWER
(output).
Channel 4 channels
Output format Photo-MOS relay
Load voltage 30VDC
Load current 100mA or less
ON resistance 10
Ω
or less
OFF resistance 500k
Ω
or higher
Communication Interfaces (Exclusive Use of the Following Three Options)
8. Specifications