background image

|

Troubleshooting Appendix

21

 

Specifications

 

Settings

 

Listening Modes

 

Playback Function

 

Basic Manual

Troubleshooting

|

Appendix

Setting Item

Default Value

Setting Details

Audio TV Out

Off

You can enjoy audio through the speakers of the 

TV while this unit is on.

"On": Use this function

"Off": Do not use this function

• 

This setting is fixed to "Auto" if you have set 

"1. Input/Output Assign" - "TV Out/OSD" - 

"HDMI Out" or "Other" - "HDMI Out" in the 

"Quick Menu" to "MAIN" or "MAIN+SUB" and 

"HDMI CEC is set to "On". If you change this 

setting, set "HDMI CEC" to "Off".

• 

Listening mode cannot be changed while "Audio 

TV Out" is set to "On" and audio is being output 

through the speakers of the TV.

• 

Depending on your TV set or input signal of the 

component, audio may not output through the 

speakers of the TV even if this setting is set 

to "On". In such case, audio is output from the 

speakers of the unit.

• 

If you operate the MASTER VOLUME dial on 

this unit when audio that is being input through 

this unit for output from the TV speakers, audio 

is output from this unit. If you do not want to 

output audio from the unit, change the unit or TV 

settings, or reduce the volume of the unit.

Audio Return 

Channel

Auto (

)

You can enjoy sound of the HDMI connected ARC 

compatible TV through the speakers connected to 

the unit.

 To use this function, set "HDMI CEC" to "On" in 

advance.

"Auto": When enjoying the TV sound through the 

speakers connected to the unit

"Off": When not using the ARC function

Auto LipSync

On

This setting automatically corrects any 

desynchronization between the video and audio signals 

based on data from the HDMI LipSync compatible TV.

"On": Automatic correction will be enabled

"Off": Automatic correction will be disabled

 

2� Network

• 

When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the 

setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each 

components, you must set "DHCP" to "Disable" and assign an address to this unit in 

"IP Address" as well as set information related to your LAN, such as Subnet Mask and 

Gateway.

Setting Item

Default Value

Setting Details

Wi-Fi

Off (Wired)

Connect the unit to network via wireless LAN 

router.

"On": Wireless LAN connection

"Off (Wired)": Wired LAN connection

Wi-Fi Setup

You can configure wireless LAN settings by 

pressing ENTER when "Start" is displayed.

Wi-Fi Status

The information of the connected access point will 

be displayed.

"SSID": SSID of the connected access point.

"Signal": Signal strength of the connected access 

point.

"Status": Status of the connected access point.

MAC Address

This is the MAC address of this unit.

This value is specific to the component and cannot 

be changed.

DHCP

Enable

"Enable": Auto configuration by DHCP

"Disable": Manual configuration without DHCP

• 

If selecting "Disable", you must set "IP Address", 

"Subnet Mask", "Gateway", and "DNS Server" 

manually.

IP Address

0.0.0.0

Displays/Sets the IP address.

Subnet Mask

0.0.0.0

Displays/Sets the subnet mask.

Gateway

0.0.0.0

Displays/Sets the gateway.

DNS Server

0.0.0.0

Displays/Sets the primary DNS server.

Proxy URL

Displays/Sets the proxy server URL.

Proxy Port

8080

Displays/Sets the proxy server port number when 

you enter "Proxy URL".

Summary of Contents for TX-RZ1100
















































































































Reviews: