background image

6

 

Specifications

 

Settings

 

Listening Modes

 

Playback Function

 

Basic Manual

Troubleshooting

|

Appendix

Setup Menu

The unit allows you to configure advanced settings to provide you with an even better 

experience.

Operation

:

Use the on-screen displays (OSD) that appear on the TV to make the settings.

Press   on the remote controller to display the Setup menu.

Setup

1. Input/Output Assign 
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous

1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input

Select the item with the cursor  /  buttons of the remote controller and press ENTER to 

confirm your selection.

Use the cursors  /  to change the default values.

• 

To return to the previous screen, press  .

• 

To exit the settings, press  .

1� Input/Output Assign

Make settings related to output to the TV, change the settings for jack allocations to the 

various input selectors, and set the feature for displaying operations on the TV (OSD), etc.

 

1� TV Out / OSD

Setting Item

Default Value

Setting Details

HDMI Out

MAIN

Select the HDMI jack to be connected with the TV.

"MAIN": When connecting the TV to the HDMI OUT 

MAIN jack

"SUB": When connecting the TV to the HDMI OUT 

SUB jack

"MAIN+SUB": When connecting to both the MAIN 

and SUB jacks

1080p -> 4K 

Upscaling

Off

When using a TV that supports 4K, video signals 

input at 1080p can be automatically upscaled to 4K 

for output.

"Off": Do not use this function

"Auto": Use this function

• 

Select "Off" if your TV does not support 4K.

Super Resolution 2

When you have set "1080p -> 4K Upscaling" to 

"Auto", you can select the degree of video signal 

correction from "Off" and between "1" (weak) and 

"3" (strong).

Zone 2 HDMI

Not Use

Make the setting when you output to the Zone 2 TV 

connected to the HDMI OUT ZONE 2/SUB jack.

"Use": Enable this function

"Not Use": Disable this function

OSD Language

English

Select the on-screen display language from the 

following.

(North American models) English, German, French,

Spanish, Italian, Dutch, Swedish

(European and Asian models) English,

German, French, Spanish, Italian, Dutch, Swedish,

Russian, Chinese

Summary of Contents for TX-RZ1100
















































































































Reviews: