Oneida Air Systems Supercell XSK000014, Owner'S Manual

Page: 20 / 32

Oneida Air Systems, Inc. 18
Assembly Instructions (Continued)
27
Install the Quick-Disconnect Kit (G19) onto
the pre-drilled hole near the bottom section of
the Drum (J1) [FIG. 27].
• Refer to the
Quick Disconnect Installation
Sheet
for more information.
FIG. 27
G19F
G19E
G19D G19C G19B G19A
J5
J1
28
Take each of the five Casters (J5) and thread
them into the holes located underneath the
Drum (J1) [FIG. 28].
FIG. 28
G20
J1
29
Place a Liner Bag (G20) inside the Drum
(J1). Take care to ensure that the bag is fully
expanded to the inside of the Drum (J1) and
that the upper edge of the Liner Bag (G20) is
folded out and over the lip of the Drum (J1)
[FIG. 29].
Note: If you do not wish to use a liner bag you
must insert Round Tapered Plug (G19G) into
the Quick Disconnect Kit (G19) from inside the
Drum (J1).
FIG. 29
G19G