Page 8
For technical questions, please call 1-800-444-3353.
SKU 68825
Discharge Chute and Chute Crank
Assembly
1. Lift the Chute Deflector so that it snaps and
locks securely onto the Discharge Chute.
2. Raise or lower the Chute Deflector to the
desired height of the snow stream and
tighten the Chute Deflector Knobs.
CAUTION!
Do not overtighten the Chute Deflector Knobs.
3.
Figure 6
Upper Chute Crank
Screw
Nut
Eye Bolt with
Rubber Grommet
Loosen the Screw and Nut on the Upper Chute Crank.
4.
Figure 7
Lower Chute Crank
Upper Chute Crank
Slide the Upper Chute Crank into the Lower Chute
Crank, aligning the screw holes. Tighten the Screw into
the aligning holes using a screwdriver (not included).
5.
Figure 8
Lower Crank
Chute Base Hole
Slide the Lower Crank into the Chute Base Hole.
6.
Figure 9
Middle Handle
Upper Chute Crank
Center Hole
Eye Bolt with
Rubber Grommet
Remove the Washer and Nut from the Eye Bolt
with rubber grommet on the Upper Chute Crank.
Position the Chute Crank so that the Eye Bolt, with
rubber grommet, inserts into the center hole of the
Middle Handle. Secure with Washer and Nut.
