Page 2
For technical questions, please call 1-800-444-3353.
SKU 68825
Specifications
Motor
120 V~ / 60 Hz / 13 A / 2200 RPM
Type
Single Stage
Plowing Width
16 IN.
Snow Depth
10 IN.
Max. Clearance
26 FT.
Chute Direction
180º adjustable
Wheel Size
4-1/2 IN. Diameter
3092405
Save This Manual
Keep this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and
cleaning procedures. Write the product’s serial
number in the back of the manual near the assembly
diagram (or month and year of purchase if product
has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
Important Safety Information
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey all safety
messages that follow this symbol to
avoid possible injury or death.
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert symbol, is used
to address practices not related to personal injury.
WARNING! Read all instructions. Failure
to follow all instructions listed below may
result in fire, serious injury and/or DEATH.
The warnings and precautions discussed in this
manual cannot cover all possible conditions and
situations that may occur. It must be understood
by the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
1. Wear ANSI-approved safety goggles, heavy-duty
work gloves, and dust mask/respirator during
set up, operation, unclogging and service.
2.
Keep clear of vanes and impellers
while motor is plugged in.
3. Keep the Power Cord trailing BEHIND the
Snow Thrower during use. Do not let the
Power Cord curl in front of Snow Thrower.
4. To prevent serious injury and entanglement,
guard must cover pulleys before operation. Do
not operate without all guards in place.
5. Disengage Direction Lever before starting.
6. Do not use near steep slopes, or where rocks,
branches, or other debris may be present.
7. Keep children and pets away. Do not allow
children to play with or operate Snow Thrower.
8. Point discharge in a safe direction. Rocks, ice and
other objects will be forcefully thrown from discharge.
9. Release Direction Lever and allow unit
to stop before changing gears.
10. Do not leave the equipment unattended
when it is operating or plugged in. Unplug
the cord before leaving the work area.
11. Only use a suitable means of transport and lifting
devices with sufficient weight bearing capacity
when transporting the Snow Thrower.
12. Secure the Snow Thrower on transport vehicles to
prevent the tool from rolling, slipping, and tilting.
