![background image](http://html.mh-extra.com/html/omron/zx-cal/zx-cal_operation-manuals_1633394042.webp)
Procedures for Reflective Sensor Heads
Section 2-3
22
2-3
Procedures for Reflective Sensor Heads
2-3-1
Positioning and Setting Threshold Values
Manual Setting
3-4-2 Inputting Threshold Values Directly
Automatic Setting
Workpiece surface positioning:
Unknown size workpiece judgement:
Judging workpiece with uneven surfaces, warped workpieces, or mov-
ing workpieces:
2-3-2
Setting Various Functions
Changing the display value:
Changing response speed or increasing resolution:
3-5-2 Number of Samples to Average
Changing positioning accuracy when operating and releasing:
Holding value during measurement:
Using OFF-delay timer:
Operation requiring two Sensor Heads:
Resetting default status:
Changing the output current or voltage range:
Special Functions (Set)
Detecting the optical level:
Special Functions (Set)
Z157-E1-01C.book Page 22 Thursday, August 31, 2006 5:13 PM