Omron ZR-RX70, User Manual

Page: 94 / 127

Setting Menus
92
ZR-RX70 User’s Manual
(9)-10 (Calculation) Execute
Performs calculation between cursors. Opens a window and displays calculation results when Execute is
selected.
For calculation results, see the table below. Press the [FILE] key to open the window to save the statistical
calculation results. Specify a save destination and select the OK key to save the statistical calculation results in
text format (CSV).
The method for specifying the save destination and file name is the same as for specifying the captured data
file.
For details, see p.85.
(9)-11 X-Y Display Settings
The ZR-RX70 can convert waveform data to X-Y display. This menu is used to assign channels and make
other settings to convert the data to X-Y display.
Selection Description
Off Calculation is not performed.
Average Displays the simple average value of data being captured.
Max Displays the maximum value of data being captured.
Min Displays the minimum value of data being captured.
Peak Displays the peak value of data being captured.
RMS Displays the effective value of data being captured.
The calculation formula is as shown below.
* D: data n: number of data
Setting Selections available
X-ch Sets a channel to be assigned to the X-axis in each zone.
Y-ch Sets a channel to be assigned to the Y-axis in each zone.
Trace Turns on or off the display in each zone.
On: Turns on the display of waveforms.
Off: Turns off the display of waveforms in this zone.