Omron ZR-RX70, User Manual

Page: 74 / 127

Setting Menus
72
ZR-RX70 User’s Manual
(3)-7 Timer Trigger Information
Displays the timer and trigger information in an easy-to-understand manner.
* This is only a conceptual illustration in which the graph length, number of times of repetition, and other items
do not agree with the actual time.
(3)-8 Alarm Setting
Specifies alarm generation conditions and output destinations. When the conditions specified here are met, an
alarm is output from the alarm output terminal (specify the output destination number for each channel).
With “Hold Generated Alarm” set to “Hold”, the alarm status is maintained after the conditions are met once
even if they do not continue to be met (Press the [CURSOR] key to clear the alarm).
See “Trigger Level Settings/Alarm Level Settings” p. 72.
Trigger Level Settings/Alarm Level Settings
If the start side source setting or stop side source setting is “Level”, specify detailed conditions for each channel.
The overall structure of level triggers are as shown below.
<Trigger Level Settings> <Alarm Settings>
Data capture is enabled only in this interval.
Data is actually captured in this interval.
A trigger generated in this interval
will not start data capture.
Example
Timer Mode: Every Day Cycle
Start Side Source Setting: Level
Stop Side Source Setting: Time
Repeated Capturing: On
CH n Mode Level
Combi-
nation
Pulse n Mode Level
Trigger
Logic n Mode
Pattern
Comparison
CH n Mode Level
Or Pulse n Mode Level
Alarm output n
Logic n Mode Level
* Pulse and Logic are toggled back and forth.
* Specify an alarm output destination for Pulse and Logic for each channel.
The conditions are ORed for each alarm output destination.
Example) Suppose CH1 and CH2 are set to Output 1 and CH3 and CH4 to Output 2.
If either CH1 or CH2 meets the conditions, Alarm Output 1 occurs.
If either CH3 or CH4 meets the conditions, Alarm Output 2 occurs.
* Pulse and Logic are toggled back and forth.
* The Logics 1 to 4 are fixed to pattern comparison.