Omron ZR-RX70, User Manual

Page: 44 / 127

Window names and functions
42
ZR-RX70 User’s Manual
12. Pen display Displays the signal positions, trigger positions, and alarm ranges for each channel.
13. File name display Displays the data capture file name during the data capture operation. If auto save is
performed, the progress of data save is displayed with the bar in the background. Dis-
plays the data replay file name during the data replay operation.
Do not turn off the power while the simplified message is “Capturing and Replaying”,
“Capturing to Internal RAM”, “Capturing to Internal Flash Memory”, “Capturing to USB
Memory”, or “Auto Saving.” Otherwise, the captured data will be destroyed. Make sure
that the message is completely gone (wait for 2 or 3 seconds) before turning off the
power.
See also “1. Simplified message display” p. 40.
14. Scale lower limit Displays the lower limit of the scale of the currently active channel.
15. Waveform display Displays the waveform of the input signal.
16. Scale upper limit Displays the upper limit of the scale of the currently active channel.
17. Data capture bar • During data capture
Displays the elapsing time and the remaining capacity of the memory in use. The
progress of data capture is displayed with the bar in the background.
Capacity of memory available for data capture .....
Indicates the capacity of free memory available for data capture at the start
of data capture. For example, if 128 MB of 256-MB memory is already in
use, the remaining 128 MB is displayed.
If the data capture destination is the internal RAM, the specified time avail-
able for data capture is indicated.
See p.67.
* The maximum value is 2 GB per file. 2 GB is indicated if the capacity of
free USB memory exceeds 2 GB.
Size of data that has been captured .....
Indicates how much of the above memory is currently in use for data capture.
Remaining memory capacity available .....
Indicates how much of the above memory remains available for data capture.
Item Description
Trigger position
Stop position
Start position
Alarm range
Rising Falling Win In Win Out
Important
Total size of data to be saved
Size of data that
has been saved
Capacity of memory available for data capture
Size of data that
has been captured
Elapsed time Remaining time available
If the pre-trigger is set to other than 0% and the size of captured data
has not yet reached the level of the pre-trigger, the time remaining
until it reaches the level of the pre-trigger is displayed in yellow.
When the sampling interval is External, the number of captured samples is displayed in green.
Remaining memory
capacity available
(Remaining capacity)