Omron ZR-RX70, User Manual

Page: 69 / 127

Setting Menus
ZR-RX70 User’s Manual
3
SETTINGS AN
D
MEASUREMENT
67
• If you perform data capture with Name Type set to Auto, data will be saved in folders automatically created with the
date and time as their respective names (The time folder is created below the date folder).
• If you perform data capture repeatedly with Name Type set to Auto, after certain number of files are captured, a new
time folder is created and data is captured to the folder.
• When you save files, create a folder and then save the files in the folder.
Regardless of the remaining capacity, if you try to save files in the root directory, due to file restrictions you may not
be able to save files.
• The displayed Capture Time may vary according to the sampling interval or number of capture channels.
(4) File Format Sets the file format in which you want to save data.
GBD
: Creates a data file in Omron proprietary binary format.
* Prevents tampering of data.
CSV : Creates a data file in a text format.
* Cannot be replayed on the ZR-RX70.
When the data capture destination is the internal flash memory or USB
memory and the sampling interval is from 1 to 5 ms, you cannot select CSV.
Select a sampling interval lower than 10ms.
Changing the sampling interval, capture destination, or number of capture
points will change the screen display of the time available for data capture,
capacity available for data capture, and possible number of times of repeat-
ing. If you find that the measuring time exceeds the capacity available for
data capture, either change the sampling interval or capture destination (to
large-capacity USB memory).
Time available for data capture .................... Indicates how long data can be
captured.
Capacity available for data capture .............. Indicates the capacity available
for data capture with the mem-
ory size if the data capture destination is the internal flash memory or
USB memory. The figure shown in brackets is the percentage of free
memory space to the total memory size.
Possible number of times of repeating......... Indicates how many times data captured to the internal RAM can be
saved to the save destination device if Auto Save is set to On. Beware
of using this setting particularly when Repeated Capturing is set to On
for the trigger.
For details, see “(3) TRIG Settings” p. 69
The time available for data capture is calculated for data up to 2GB. If the capacity of free USB memory is 2GB or
more, "over" is displayed.
When the time available for data capture (for 2GB) is exceeded, after the data of 2GB is captured, the capture of
remaining data is automatically resumed to another file.
The data between the stop and resumption of the capture process is not captured when the sampling interval is too
fast.
Setting Description
Important
Note