Omron WS02-CFSC1-E, Operation Manual

Page: 49 / 87

34
Setting Initial Values Section 3-4
3-4 Setting Initial Values
The initial values of input tags can be entered when debugging with the Logic
Window. Use the following procedure to set the initial values of input tags.
1,2,3... 1. Select Debug - Set Initial Value .
The following dialog box will be displayed.
2. Select an input tag to set the initial value for debugging. To select more
than one tag, hold down the
Shift Key or the Ctrl Key while selecting tags
with the mouse.
3. Click the buttons on the right of the Input Tag List to set the initial values
and then click the
OK Button.
Functions of the buttons are given below.
When the OK Button is clicked and the dialog box is closed, the settings
will be reflected in the program.
Note The tags in the Input Tag List can be set to ON or OFF by double-clicking
them.
Button Function
ON/OFF Turns ON to OFF, and OFF to ON.
All ON Turns ON all tags.
All OFF Turns OFF all tags.
Current Value Sets the tag to its present value.