Omron WS02-CFSC1-E Operation Manual Download Page 61

Page: 61 / 87

Inputs to the Timing Chart

Section 4-4

4-4-4

Editing the Timing Chart with a Text Editor

The timing chart can be edited with a text editor by using the copy and paste
functions.

1,2,3...

Select the area of the timing chart that you want to edit.

Select

Edit

Copy

The contents will be copied to the clipboard.

Start a text editor and paste the content of the clipboard in it. The data will
be displayed in 0s and 1s as shown below.

After the text has been edited, copy the text in the text editor to the clip-
board.

Go to the timing chart and select

Edit

Paste

Note

When using a text editor to edit the timing chart, do not delete the first line
'NE1ASimulatorTimingChart'. If this line is missing, or characters other than 0
and 1 are entered, the data cannot be pasted.

Summary of Contents for WS02-CFSC1-E
























































































Search results

Summary of Contents for WS02-CFSC1-E

Reviews:

Related manuals for WS02-CFSC1-E

Brands by name

Popular brands

Omron WS02-CFSC1-E, Operation Manual

Search results

Summary of Contents for WS02-CFSC1-E

Reviews:

Related manuals for WS02-CFSC1-E

Brands by name

Popular brands