Omron WS02-CFSC1-E Operation Manual Download Page 69

Page: 69 / 87

Breakpoints

Section 4-9

4-9

Breakpoints

When a timing chart with breakpoints is executed, it will pause after evaluating
the row with the breakpoint, allowing you to check the status.

Breakpoints can be temporarily disabled.

4-9-1

Adding Breakpoints

1,2,3...

Move the cursor on the timing chart where you want to add a breakpoint.

Select

Breakpoints

Register/Unregister

A breakpoint mark will be added.

Note

There is no limit to the number of breakpoints that can be added.

4-9-2

Deleting Breakpoints

1,2,3...

Move the cursor on the timing chart to the breakpoint that you want to re-
move.

Select

Breakpoints

Register/Unregister

The breakpoint will be deleted and the mark will disappear.

4-9-3

Enabling/Disabling Breakpoints

1,2,3...

Move the cursor on the timing chart to the breakpoint that you want to en-
able or disable.

Select

Enable

Disable

from the Breakpoints Menu.

The breakpoint will be enabled or disabled and the mark will change.

• Enabled Breakpoint

• Disabled Breakpoint

Breakpoint Mark

Cursor

Summary of Contents for WS02-CFSC1-E
























































































Search results

Summary of Contents for WS02-CFSC1-E

Reviews:

Related manuals for WS02-CFSC1-E

Brands by name

Popular brands

Omron WS02-CFSC1-E, Operation Manual

Search results

Summary of Contents for WS02-CFSC1-E

Reviews:

Related manuals for WS02-CFSC1-E

Brands by name

Popular brands