Omron WS02-CFSC1-E, Operation Manual

Page: 30 / 87

15
Simulation Procedure Section 2-7
2-7 Simulation Procedure
Use the following procedure to simulate execution of a safety logic program.
Create a logic program using the logic editor in the Network Configurator.
Open the simulation file (.smr) in the NE1A Logic Simulator or import the program.
Create a simulation file (.smr) using the Network Configurator.
Execute the simulation in the NE1A Logic Simulator.
1. Create a Logic Program
3. Read in the File
2. Create a Simulation File
4. Execute the Simulation
….Refer to 2-9 Creating Simulation Files .
….Refer to 2-10 Opening Simulation Files or 2-11 Importing Programs .
….Refer to SECTION 3 Debugging with the Logic Window and SECTION 4 Debugging with the
Timing Chart Window .
….Refer to DeviceNet Safety System Configuration Manual (Cat. No. Z905).