![background image](http://html1.mh-extra.com/html/omron/ws02-cfsc1-e/ws02-cfsc1-e_operation-manual_744143033.webp)
18
Opening Simulation Files
Section 2-10
2-10 Opening Simulation Files
Use the following procedure to load the simulation file (*.smr file) to run a sim-
ulation.
1,2,3...
1.
Select
File
-
Open
.
The following dialog box will be displayed.
2.
Select the simulation file and click the
Open
Button.
If there is a password setting on the program in the opened simulation file,
the following Confirm Password Dialog Box will be displayed.
3.
Enter the password and click the
OK
Button.
Note
If there is no password setting, the Confirm Password Dialog Box
will not be displayed.
The simulation file (*.smr file) will be loaded and displayed on the screen.
Note
To set the password, select the
Enable Password
Option on the Program Tab
Page of the Edit Device Parameter Dialog Box in the Network Configurator.
Summary of Contents for WS02-CFSC1-E
