Omron WS02-CFSC1-E, Operation Manual

Page: 29 / 87

14
Status Bar Section 2-6
2-6 Status Bar
The following information is displayed in the Status Bar.
Cycle Time
Debug Status
ID + Device comment
Cycle Time Base Value
Pulse
Cursor Position
(Selected Pulse Width)
Item Description
ID + Device comment Displays the device ID and device comment that have been
set by the Network Configurator.
Debug Status Displays the debug status: Run, Pause, or Stop
Cycle Time Displays the device cycle time.
Cycle Time Base Value Displays the cycle time base value.
Pulse Width Displays the multiplier of the time width of one pulse in the
timing chart against the device cycle time.
Cursor Position Displays the cursor position on the timing chart. The time of
the selected section of the pulse is shown in the brackets.
When a timing chart simulation is running, the current exe-
cution point will be displayed.