System Command
Section 5-4
5-27
5-4-7 EAS Setting (ES): I.CODE1 Mode Only
This command sets the EASBit of a Tag incorporating I.CODE1 chip. When the EASBit is disabled,
the Reader/Writer will not return a response to the EAS Check Command (EA).
<Command Format>
STX
Node No..
Command code
“ES”
Setting
00to01
00:EAS en-
abled
01:EASdisable
d
ETX BCC
1 2
2
2 1
1
<Response Format>
STX Node
No..
Retry
flag
Command code
“ES”
Response
code
“00”
ETX BCC
1 2 1 2
2 1
1
Response code
00:normal completion
For other response codes, refer to 5-2-4 Response Code List.
Note
The relative commands are set in offline mode (refer to 5-6-12 FL Command).
This command is for I.CODE1 mode Only. The command is not available in
ISO mode.
5-4-8 QuietBit Setting (QB): I.CODE1 Mode Only
This command sets QuietBit of a Tag incorporating I.CODE1 chip. If you enable this bit, a Tag
ceases to return a response to any command (excluding the EAS Command).
<Command Format>
STX
Node No..
Command code
“QB”
Setting ETX
BCC
1
2 2 2
1
1
Setting
Specification range:00h to 01h
00: Disable QuietBit
01: Enable QuietBit
<Response Format>
STX Node
No..
Retry
flag
Command code
“QB”
Response
code
“00”
ETX BCC
1 2 1 2
2 1
1
Response code
00:normal completion
For other response codes, refer to 5-2-4 Response code List.
Note
This command is for I.CODE1 Mode Only. The command is not available in
ISO mode.