Other Commands
Section 5-8
5-60
5-8-3 Table of Communications Methods
Name
Code
Description
Single Trigger
ST
Immediately after receiving a command, the Reader/Writer communicates with a
Tag and returns a response.
If the Tag is missing, an error is returned.
During communications, only one Tag should exist in the communications area.
Single Auto
SA
After receiving a command, the Reader/Writer waits for a Tag to enter the com-
munications area. Next, the Reader/Writer communicates with the entering Tag
and returns a response. During communications, only one Tag exists in the com-
munications area.
Single Repeat
SR
After receiving a command, the Reader/Writer waits for a Tag to enter the com-
munications area. Next, the Reader/Writer communicates with the entering Tag
and returns a response. After sending the response, the Reader/Writer enters a
Tag waiting state again and repeats this process until receiving the Stop or Reset
Command.
During communications, only one Tag should exist in the communications area.
Multi-trigger
MT
Immediately after receiving a command, the Reader/Writer communicates with all
of the Tags existing in the communications area and returns responses corre-
sponding to each Tag.
If the Tag is missing, an error is returned.
Multi-repeat
MR
The Reader/Writer waits for Tags to enter the communications area. It communi-
cates with all of the Tags existing in the communications area and returns re-
sponses corresponding to each Tag. After completing communications, the
Reader/Writer disables the operation of the Tag. After sending the response, the
Reader/Writer enters a Tag waiting state again and repeats this process until re-
ceiving the Stop or Reset Command.
FIFO Trigger
FT
Immediately after receiving a command, the Reader/Writer communicates with a
Tag and returns a response.
After completing communications, the Reader/Writer disables the operation of the
Tag. After sending the response, the Reader/Writer will continue to operate until it
receives a FIFO command, stop command, or reset command.
During communications, only one Tag in the Communications area is operable.
FIFO Auto
FA
After receiving a command, the Reader/Writer waits for a Tag to enter the com-
munications area. Next, the Reader/Writer communicates with the entering Tag
and returns a response. After sending the response, the Reader/Writer will con-
tinue to operate until it receives a FIFO command, stop command, or reset com-
mand.
After sending the response, the Reader/Writer enters a command waiting state.
During communications, only one Tag in the Communications area is operable.
FIFO Repeat
FR
The Reader/Writer waits for a Tag to enter the communications area and commu-
nicates with the entering Tag. After completing communications, the Reader/Writer
disables the operation of the Tag. After sending the response, the Reader/Writer
enters a Tag waiting state again and repeats this process until receiving the Stop
or Reset Command. During communications, only one Tag in the Communications
area is operable.
Selective
Access Trigger
LT
、
A Tag selected from among multiple Tags in the communications area is ac-
cessed.
