![background image](http://html.mh-extra.com/html/omron/scc-1224/scc-1224_installation-and-operating-manual_1633415005.webp)
I
M P O R T A N T
S
A F E T Y
M
E S S A G E
5
Safety Edge Controllers Manual 99640-0010 Rev.P
Original Instructions
Do not use Safety Edge and Controller to initiate machine or
equipment motion.
•
All brakes and other stopping mechanisms must be inspected
regularly to ensure proper working order. If the stop mechanisms and
associated controls are not working properly, the machine may not stop
safely even though the Safety Edge and Controller are functioning
properly.
•
Only qualified personnel must install and test the Safety Edge and
Controller. Do not perform any test or repairs other than those outlined in
this manual. All electrical wiring must be installed in accordance with
local electrical codes and regulations.
•
The user must follow all procedures in this manual for proper
operation of the Safety Edge and Controller.
The enforcement of these requirements is beyond Omron STI’s
control. The employer has the sole responsibility to follow the
preceding requirements and any procedures, conditions and
requirements specific to your machinery.