![background image](http://html.mh-extra.com/html/omron/scc-1224/scc-1224_installation-and-operating-manual_1633415003.webp)
I
M P O R T A N T
S
A F E T Y
M
E S S A G E
3
Safety Edge Controllers Manual 99640-0010 Rev.P
Original Instructions
1 I
MPORTANT
S
AFETY
M
ESSAGE
The Safety Edge and Controller, when used together as a system, is an
emergency stop device when applied, installed, operated, and
maintained in accordance with the instructions in this manual. The
design and construction of this device is in accordance with CEN -
European Committee for Standardization for CEN member countries.
This organization provides general information and guidelines on the
proper methods for manufacturing this type of a device as it relates to
machine safeguarding.
Whether a specific machine or other application and Safety Edge and
Controller installation fully comply with ISO 13849-1 depends on
several items including: the proper application, installation,
maintenance and operation of the Safety Edge and Controller. These
items are the sole responsibility of the purchaser, installer and
employer.
The employer is also responsible for the selection and training of the
personnel necessary to properly install, operate and maintain the
machine and its safety systems. For example, Safety Edge and
Controller should be installed, checked out and maintained only by a
qualified person.
The user is that person(s) identified and designated by the employer as
being appropriately trained and qualified to perform a specific
procedure. Often the user is the installer, die setter, electrician,
maintenance personnel, supervisor, or foreman, etc., involved with the
setup, test and checkout of the machine and all safety devices.