![background image](http://html.mh-extra.com/html/omron/scc-1224/scc-1224_installation-and-operating-manual_1633415019.webp)
I
N S T A L L A T I O N
Se
tup
19
Safety Edge Controllers Manual 99640-0010 Rev.P
Original Instructions
7.3.5
W
ARNING
: I
NCORRECT
M
OUNTING
M
ETHOD
Do not attempt to push or pull the Safety Edge into the aluminum rail.
This can cause damage to the safety contact.
Figure 7-6 Incorrect Mounting Method
7.3.6
I
NSERTING
THE
PROFILE
INTO
A
LUMINUM
R
AIL
(Models SGE1510,SGE125, SGE225, SGE245)
Figure 7-7 Safety Edges in position
Please Note: The SGE1510,SGE125, SGE225, SGE245 (shown
above), may be inserted into the track by sliding it into position, all
others Safety Edges must be installed as outlined in Section
7.3.4
above.