![background image](http://html.mh-extra.com/html/omron/scc-1224/scc-1224_installation-and-operating-manual_1633415018.webp)
I N S T A L L A T I O N
Setup
18
Safety Edge Controllers Manual 99640-0010 Rev.P
Original Instructions
7.3.3
W
IRE
R
OUTING
If the wire is to be fed through the aluminum rail, drill a 5/16 hole in the
mounting rail. Be sure that the hole is properly de-burred to prevent
damage to the wire.
Figure 7-4 Feeding through Aluminum Rail
7.3.4
I
NSERTING
THE
PROFILE
INTO
A
LUMINUM
R
AIL
(Models SCS2525N, SCS2540N, SCS3580, SGE365, SGEY365)
When inserting the rubber profile into the aluminum rail, liquid soap may
be sprayed on the Safety Edge to make it easier to install. Insert one side
first, then insert the other side. Once the soap has evaporated the strip is
securely fastened to the mounting rail.
Never use talcum, oils or other permanent lubrication agents.
Figure 7-5 Inserting the Rubber Profile