Omron NX701-1620, User Manual

Page: 32 / 168

Regulations and Standards
30 NX-series CPU Unit Hardware User’s Manual (W535)
Some NX-series products comply with UL and CSA standards.
If you use a product that complies with UL or CSA standards and must apply those standards to your
machinery or devices, refer to the
Instruction Sheet that is provided with the product. The Instruction
Sheet provides the application conditions for complying with the standards.
When you use this product in South Korea, observe the following precautions.
This product meets the electromagnetic compatibility requirements for business use. There is a risk of
radio interference when this product is used in home.
The NJ/NX-series Controllers comply with the following shipbuilding standards. Applicability to the ship-
building standards is based on certain usage conditions. It may not be possible to use the product in
some locations. Contact your OMRON representative before attempting to use a Controller on a ship.
• The NJ/NX-series Controller must be installed within a control panel.
• Gaps in the door to the control panel must be completely filled or covered with gaskets or other mate-
rial.
• The following two noise filters must be connected in series to the power supply line.
Noise Filter
This product incorporates certain third party software. The license and copyright information associated
with this software is available at http://www.fa.omron.co.jp/nj_info_e/.
Conformance to UL and CSA Standards
Conformance to KC Certification
Conformance to Shipbuilding Standards
Usage Conditions for NK and LR Shipbuilding Standards
Manufacturer Model
Cosel Co., Ltd. TAH-06-683
Software Licenses and Copyrights