77
5-3
Maintenance Mode
The set values of the K3NH can be initialized and field calibration of the K3NH is
possible in maintenance mode. The operations of the K3NH in this mode are de-
scribed below.
5-3-1 Maintenance Mode
•
The K3NH will be in maintenance mode if the Mode and Shift Keys are simulta-
neously pressed while the K3NH is turned on.
•
The K3NH in maintenance mode will go into RUN mode if the Escape Key is
pressed.
RUN mode
Press the Mode and Shift Keys
while turning the K3NH on.
Power On
Press the Escape and Up
Keys for 1 second.
Maintenance mode
RUN mode
1 second
Setting mode
Protect mode
5-3-2 Initialization
Follow the steps described below to reset the set values of the K3NH to factory-
set values.
1, 2, 3...
1. Press the Mode and Shift Keys simultaneously while turning the K3NH on.
The
mant
maintenance mode setting will be displayed.
Set Value LED Display Model
Basic Model
2. Press the Mode Key for more than one second. The
reĆin
initialization set-
ting will be displayed.
Set Value LED Display Model
Basic Model
3. Press the Up Key to display
no
.
Set Value LED Display Model
Basic Model
Maintenance Mode
Section 5-3
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
