54
Follow the steps described below to set the following.
H: 100
L: 0
Set Value LED Display Model
Basic Model
1, 2, 3...
1. Press the Mode Key for more than one second while the
opt
option menu is
displayed. The
aUg
average processing setting will appear.
Set Value LED Display Model
Basic Model
2. Repeatedly press the Mode Key until the
lset.h
H linear output range set-
ting is displayed.
Set Value LED Display Model
Basic Model
3. Press the Shift Key to display the prior set value
9999
for changing. The
PROG indicator will flash.
Set Value LED Display Model
Basic Model
4. Press the Up and Shift Keys to set the value to
100
. The setting will be vali-
dated automatically if no change is made for five seconds. The
lset.h
H lin-
ear output range setting will be displayed again.
Note Press the Mode Key to enter the set value immediately. The next pa-
rameter will be displayed for setting.
+
Set Value LED Display Model
Basic Model
5. Press the Mode Key to display the
lset.l
L linear output range setting.
Set Value LED Display Model
Basic Model
6. Press the Shift Key to display the prior set value
Ć1999
for changing. The
PROG indicator will flash.
Set Value LED Display Model
Basic Model
SETTING
EXAMPLE
Setting Mode
Section 3-2
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
