4.2 Using the Digital LED Operator
Use the LED operator to enter run and stop commands, display data, edit parameters, as well as display fault and alarm
information.
u
Keys, Displays, and LEDs
P
9
5
1
2
3
6
7
8
10
STOP
11
14
12
13
15
4
J1000
STOP
据据据据据据据据据据据据据据据据据据据据据据据据
据据据据据据据据据据据
5
据据据据据据据据据据据据
据据据据据据据
400V
据据据据据据据据据据据据据据据据据据据据
据据据据据据据据据据据据据据据据据据据据据
据据据据据据据据据据据据据据据
据据据
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
1
据据据据据
2
据据据据据据
3
据据据据据
4
据据据据
5
据据据据
:
:
:
:
:
:
:
:
:
6
据据据
7
据据据据据
8
据据据据据据
9
据据据据据据据
Table 4.1 Keys and Displays on the LED Operator
No.
Display
Name
Function
1
Data Display Area
Displays the frequency reference, parameter number, etc.
2
ESC Key
Returns to the previous menu.
3
RESET Key
Moves the cursor to the right.
Resets the drive to clear a fault situation.
4
RUN Key
Starts the drive.
5
Up Arrow Key
Scrolls up to select parameter numbers, setting values, etc.
6
Down Arrow Key
Scrolls down to select parameter numbers, setting values, etc.
7
STOP
STOP Key
Stops the drive.
Note:
Stop priority circuit. A fast-stop is available by pressing the STOP key when
the drive detects a danger even if the drive is running by a signal from the multi-
function contact input terminal (REMOTE is set). To avoid stoppage by using the
STOP key, set o2-02 (STOP Key Function Selection) to 0 (Disabled).
8
ENTER Key
Selects all modes, parameters, settings, etc.
Selects a menu item to move from one display screen to the next.
9
LO/RE Selection Key
Switches drive control between the operator (LOCAL) and the control circuit
terminals (REMOTE).
Note:
LOCAL/REMOTE key effective during stop in drive mode.
10
RUN Light
Lit while the drive is operating the motor.
11
LO/RE Light
Lit while the operator (LOCAL) is selected to run the drive.
4.2 Using the Digital LED Operator
54
SIEP C710606 33A OYMC AC Drive – J1000 User Manual
