Omron GRT1-ECT SmartSlice, Operation Manual

Page: 92 / 142

7 GRT1-ECT Installation
7 - 16 GX-series EtherCAT Slave Unit User’s Manual
 Removing Wires
To remove the wires press the release button above the terminal hole using a slotted precision
screwdriver and pull out the wire.
 Recommended Power Supplies
Use a SELV power supply with over current protection.
A SELV power supply has redundant or increased insulation between the I/O, an output voltage of
30 Vr.m.s and a 42.4-V peak or maximum of 60 VDC.
Recommended power supply: S82K-01524 (OMRON) or S8TS-06024 (OMRON).
 Recommended Wire
Strip Length
Pin Terminal Length
Strip wire between 7 and 10 mm of insulation at the ends of the wires (stranded or solid wire) or use
pin terminals with a pin (conductor) length of 8 to 10 mm.
Type Gauge
Stranded wire 20 AWG to 16 AWG
(0.5 to 1.25 mm
2
)
Solid wire
Pin terminal
Slotted precision screwdriver
Release button
3.5 mm 0.6 mm
Side view Front view
Recommended model: SZF1 (Phoenix Contact)
Strip 7 to 10 mm.
Pin length: 8 to 10 mm